Building…

Press-in label for slatwall

Labels to print

One label per line (up to 40). Put | between two lines to make a two-line label, e.g. PAINT|EXTERIOR

Show on the wall

Label

Length

The plate, along the wall. Each holder adds its end stop beyond this. Up to 250 mm so a plate fits a 256 mm bed

Text

Font

Letter height

Height of the capital letters

Either way the letters are a separate part, so they can be another colour

Holders

Friction: the split tongue is a little taller than the slot and springs against it. Snap barbs: the tongue reaches past the lip and two small barbs catch behind it

Colours

Press-in label

A plain label plate held at each end by a holder that presses straight into the slot. Nothing sticks out of the label; type a list to print a whole batch.

Version 1.0.0 · CC BY 4.0 · Free

Walls it fits

VEVOR PVC slatwallFits
StoreWallFits
HandiwallFits
Trusscore SlatWallFits
Retail MDF slatwall, 3 inFits
Flow WallFits
Gladiator GearWallFits
ProSlat PVC slatwallProSlat doesn't publish its slot. Measure your wall and use Custom.