Caulk tube rack on slatwall, holding four caulk tubes

Building…

Caulk tube rack for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Tubes

Tube diameterTested

Standard 300 ml (10 oz) caulk tubes are about 51 mm across; 28 oz adhesive tubes about 70 mm

Number of tubes

Up to 4; stops at what fits a 256 mm print bed: four 51 mm tubes, three 75 mm ones

Holds: Caulk tube
Kind: Caulk & tube holder
Prints as: 2 pieces
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Caulk tube rack

Holds: Caulk tube

Prints as 2 pieces

Holds caulk, silicone and glue tubes nozzle down, so each is ready to use. Drop a tube in nozzle first and a funnel centres it. Print in PETG or ASA, not PLA, and keep it to 1.2 kg, about three full tubes.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · some wall sizes assumed · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount and the dovetail slide need a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 1.0.0

More for caulk tube

Everything for caulk tube ›