Glove-box holder on slatwall, holding a box of gloves

Building…

Glove-box holder for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Box

Box width

Along the wall. A standard 100-glove box stood on end is about 125 mm; a stack of folded shop rags about 200 mm

Box depth

Out from the wall: the box's thickness behind its dispensing face. 50 mm or more leaves room for your hand to reach the lock lever at the bottom

Box height

Sets how tall the back is: under 190 mm it spans two slats (about 160 mm inside), 190 mm and up three (about 235 mm). A box may stand a little above the back

Holds: Gloves & rags
Kind: Glove & rag dispenser
Prints as: One piece
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Glove-box holder

Holds: Gloves & rags

Prints as 1 piece

Holds a box of disposable gloves on end, dispensing face out, or a stack of folded rags. Drop the box in from the top and pull gloves from the front. Measure your box, print in PETG or ASA, not PLA, and keep it to gloves and rags, 1 kg at most.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · some wall sizes assumed · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the multi-slot lock needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 1.0.0

More for gloves & rags

Everything for gloves & rags ›