Hose and cord wall clamp for slatwall

Hose and cord wall clamp

Holds: Cables

Prints as 1 piece

Clamps a garden hose or extension cord flat against the slatwall with the cam-lock mount and its latch. Set the hose or cord diameter (presets for a 15.5 mm garden hose and a 9.2 mm extension cord) and whether it runs side to side or up and down. Lay the hose against the wall, roll the top L into the slot above and swing the clamp flat: a thick half-round strap that opens toward the wall comes down over the hose, its legs passing either side of it, and its front presses the hose a little flatter against the wall (Squeeze sets how much). Turn the lever upright to lock it; the latch on the key's tip turns up behind the slat so the clamp can't be pulled off. Running side to side, the strap runs the full width of the mount straight off the bottom of its foot. Running up and down, the strap runs the height of the mount beside it, from just above the lever to the top, so the hose is held along a long stretch; set the hose in the strap as you hang it.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.