Scanner hook with label flag on slatwall, holding a bag of small parts

Building…

Scanner hook with label flag for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Settings

Peg reach

How far the lower peg reaches out before its tip turns up. The flag arm grows with it

Hanging room

Clear space between the top of the peg and the flag arm above it, just out from the brace. It narrows by about 1.5 mm toward the tip. Leave room for the hang loops or tabs of what you hang

Flag width

Outside width of the label flag, reaching left from the mount's right edge. The label card is 6.5 mm narrower

Holds: Small parts, Labels
Kind: Hook with label flag
Prints as: One piece
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Scanner hook with label flag

Holds: Small parts · Labels

Prints as 1 piece

Hangs bags and loops on a peg with a label flag above, like a shop's scanner hook. The label shows when the hook is empty, and its card swaps out. Hang no more than 1 kg on the peg and nothing on the flag; print the hook in PETG or ASA.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · some wall sizes assumed · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the hook arm needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 0.2.0

More for small parts

Everything for small parts ›