Skip to main content
Pick your wall
Create with AI
Six-prong hook on slatwall, holding two cables and a rag

Building…

Six-prong hook for slatwall

Not test-printed yetBuilding…

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Body, black
  • Filament 2 — Key, azure

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Six-prong hook

    Holds: Cables · Gloves & rags

    Prints as 1 piece

    Hangs cables, caps, gloves, safety glasses or a headset side by side on two to six prongs. Set how many, how far apart and how far they reach. Hang no more than 1 kg on any one prong, and print in PETG or ASA, not PLA.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    • VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
    • StoreWallFits · some wall sizes assumed · not test-printed yet
    • HandiwallFits · some wall sizes assumed · not test-printed yet
    • Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
    • Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
    • Flow WallFits · some wall sizes assumed · not test-printed yet
    • Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
    • ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

    History

    1. 0.2.1

    More for cables

    Everything for cables ›