Skip to main content
Pick your wall
Create with AI
Slat end cap on a slatwall

Building…

Slat end cap for slatwall

Not test-printed yetBuilding…

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Cap, #B8BCC2
  • Filament 2 — Holders, #8E939A

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Slat end cap

    Prints as 3 pieces

    Covers the cut end of a slatwall run from the front, hiding the open end of the slot. Two holders press into the slot at the edge and the cap drops in; a cap in every slot makes a trim strip.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 1.0.0

    More fit & finish

    All fit & finish ›