Locking wire-rack clip on slatwall, holding a wire basket

Building…

Locking wire-rack clip for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Size

Clip width

Width along the slot. 25.4 mm (1 in) is the print-tested mount width; go wider for heavier bins. For a wire rack, keep it narrower than the gap between the rack's upright wires

What it hangs

Slot width (bin lip or rack wire)

Measure the bin's hanging lip or the rack's top wire with calipers and enter that. The printed slot adds your printer fit and Extra slot room, so don't add clearance yourself

Slot depth

How far the bin's lip or the rack wire drops into the slot. Measure the lip's height; for a wire use 2-3 times its thickness

Holds: Wire basket
Kind: Locking accessory clip
Prints as: One piece
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Locking wire-rack clip

Holds: Wire basket

Prints as 1 piece

Hangs plastic bins by their back lip, or wire racks and baskets by their top wire. It locks to the wall, so it can't lift out when you pull a bin off; use two per bin. Check each lever stands upright before you hang the bin, which hides it; print in PETG or ASA.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · some wall sizes assumed · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · some wall sizes inferred · not test-printed yet
Retail MDF slatwall, 3 inFits · some wall sizes inferred · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 1.0.0

More for wire basket

Everything for wire basket ›