Skip to main content
Pick your wall
Create with AI
Outlet trim frame on a slatwall
Turn it in 3D

1 / 4Photo

Fit & finish

Outlet trim frame for slatwall

Frames an outlet or switch cut-out in a slatwall panel, hiding its rough edge.

Not test-printed yetBuilding…

Customize
Kind
Outlet trim
Prints as
3 pieces
Needs
Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Frame, #E6E6E2
  • Filament 2 — Holders, #E6E6E2

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Outlet trim frame

    Prints as 3 pieces

    Frames an outlet or switch cut-out in a slatwall panel, hiding its rough edge. Two holders press into the slot beside it, and the cover plate clamps the frame. Print the holders in PETG or ASA; the frame doesn't replace the box extension ring your electrical code asks for.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 2.0.0

    More fit & finish

    All fit & finish ›